mgb-v8
[Top] [All Lists]

Re: Rear Main Seal

To: "Bruce" <brucemills@dccnet.com>, "MGB Newsgroup" <mgb-v8@autox.team.net>
Subject: Re: Rear Main Seal
From: <paul.hunt1@virgin.net>
Date: Mon, 21 May 2001 20:54:40 +0100
References: <000b01c0e190$72014540$198405d1@bruce>
Reply-to: <paul.hunt1@virgin.net>
Sender: owner-mgb-v8@autox.team.net
On a factory car you have to lift the engine off its mounts a bit but that
is all.

PaulH.

----- Original Message -----
From: Bruce <brucemills@dccnet.com>
To: MGB Newsgroup <mgb-v8@autox.team.net>
Sent: Monday, May 21, 2001 1:53 AM
Subject: Rear Main Seal


> I just got back from a 600 mile trip in my new Rover 3.5 conversion. The
> rear main is leaking quite badly. Went through about 4 qts of oil. I was
> wondering if the Buick 215 and Rover 3.5 rear mains are the same. Also
will
> I be able to do this with the engine in the car if there is enough
clearance
> to remove the oil pan?

///
///  mgb-v8@autox.team.net mailing list
///  Send admin requests to majordomo@autox.team.net
///  Send list postings to mgb-v8@autox.team.net
///  Edit your replies!  If they include this trailer, they will NOT be sent.
///


<Prev in Thread] Current Thread [Next in Thread>