Scott,
What is broken on your generator? If it is only the bearing, a local
electrical shop should be able to do the job. Joe Curto mentioned on
the TABC list that he had some TC armatures available. You might check
with him if that is what you need( www.joecurto.com). He normally only
does carbs but comes across other stuff from time to time. Otherwise, I
don't have any suggestions.
And on your distributor, I haven't used them yet, but I've heard glowing
reviews about Advanced Distributors (http://www.advanceddistributors.com/ )
Regards,
Charles Hill
S Allen wrote:
> Hi,
>
> So I took apart the generator and it looks like the bearing cracked which
> allowed enough play in the shaft for it to beat itself to death.
>
> Two questions. First Moss sells a "new" one, but I haven't had much luck with
> Moss electricals. Does anyone have any thoughts?
>
> Second, if I shouldn't go with the Moss option, does anyone on the list know a
> place that does good, quality re-builds?
>
> Also, while I'm at it, does anyone know a place that does good, quality
> distributor re-builds? The BGT's is overdue...
>
> Thank you in advance,
>
> Scott Allen
>
> 52 TD
> 74 1/2 BT
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mg-t@autox.team.net
http://autox.team.net/mailman/listinfo/mg-t
Archives at http://www.team.net/archive
|