Bud,
I just went back to see what I wrote in my sent file and here is what I see:
> Since the XPAG/XPEG engines only have a single timing point, one
> either adjusts them statically or uses a dial back timing light to set
> the timing. Since i have a dial back timing light, I use that to set
> the timing at about 50 - 60 BTDC at idle and a total of 350 BTDC at
> around 2800 rpm - 3000 rpm.
>
> Cheers,
> Dave
I'm not sure how those extra 0s got in there (perhaps my e-mail program
is multiplying everything by 10). Anyway, you are right it should be 5
-6 degrees and 35 degrees. Looking at the quote in your e-mail and what
I wrote, it may be that the degree symbol that I used may have gotten
converted somehow to 0s. I wonder now, how many other e-mails that I
have written, using the degree symbol have wound up as 0s.
Cheers,
Dave
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mg-t@autox.team.net
http://autox.team.net/mailman/listinfo/mg-t
Archives at http://www.team.net/archive
|