Mike, I believe you are correct. I just had my TD's (TD3042) gearbox out
this past spring and do not recall that the shaft extended any significant
distance into the rear housing. It's back in the car and I'm not looking
forward to having to remove it again, although a replacement of the shifting
forks and sliding hubs is in its future - very near future.
Cheers,
Lew Palmer
P.S. How are the wiper parts working out?
-----Original Message-----
From: mg-t-bounces+lpalmer=roundaboutmanor.com@autox.team.net
[mailto:mg-t-bounces+lpalmer=roundaboutmanor.com@autox.team.net] On Behalf
Of Mike Duvall
Sent: Wednesday, October 10, 2007 1:32 PM
To: MGtseriesowners@yahoogroups.com; mg-t@autox.team.net; MG_TABC; mgs;
british-cars@autox.team.net
Subject: [Mg-t] TD transmission question continued.
Can anyone with an early TD transmission send me the dimension for
how far the 3rd/4th selector shaft extends from the selector? Mine
is 7/16th and I think that is an incorrect amount. The early
transmission did not have a shaft that ran into the remote housing.
I think someone took a later shaft cut it off and got the length wrong.
I can send a picture if you need it.
thanks, MIke
_______________________________________________
lpalmer@roundaboutmanor.com
Mg-t@autox.team.net
http://autox.team.net/mailman/listinfo/mg-t
Archives at http://www.team.net/archive
_______________________________________________
Mg-t@autox.team.net
http://autox.team.net/mailman/listinfo/mg-t
Archives at http://www.team.net/archive
|