One day I am going to finish this engine. I just discovered that you can9t
put the flywheel on after the crank has been installed in the engine with
the dowels in place. I almost learned this after installing the pan.
One question-I have the dowel pins removed from the crank. Can one put the
flywheel on the crank bolted loosely and then drive the dowel9s home, then
tighten the bolts and get a good installation? Or is it absolutely
necessary to put the dowels in the crank, the flywheel on the crank and then
the crank on the block?
Any help and suggestions would be appreciated.
Bill Loubiere
1952 TD
///
/// mg-t@autox.team.net mailing list
///
|