Laura & Ben Prince wrote:
> My transmission drain plug tends to leak, even when the plug is in tight. The
> washer on the plug is a thin copper compression type that I bought from Moss.
> (Yes, I replace the washer whenever the oil is drained.)
>
> I would like to get some gearbox drain plug washers that seal better. I
> believe that aluminum, copper or fiber would be acceptable. The plug is
> 1.160", so a few thou more for the washer inside diameter would be OK. The
> washer outside diameter should be about 1-9/16". Thickness should be about
> 3/32".
>
> Does anyone know of a source for sealing washers?
>
> Thanks,
>
Ben
There are washers available with rubber O rings built in. john Seim has a
source.
<kingseim@earthlink.net>
Jerry
///
/// mg-t@autox.team.net mailing list
///
|