Bob,
The original exhaust pipe is on my car #21934. R&R of the starter is
not difficult. Perhaps someone knows that earlier pipes were different?
Bob
On Fri, 24 Nov 2000 22:35:39 EST BobMGT@aol.com writes:
> The shop manual says the exhaust system must be removed in order to
> change
> the starter. I had no problem installing a new starter with the
> exhaust
> system in place. With a little manipulation the starter can be
> dropped down
> between the exhaust pipe and the frame, no need to jack the car up.
> What was
> the shop manual thinking? (Maybe the original exhaust pipe
> interfered, but
> the reproduction doesn't.)
>
> Bob Donahue (Still stuck in the '50s)
> EMAIL - BOBMGT@AOL.COM
> 52 MGTD - under DIY restoration NEMGTR #11470
> 71 MGB - AMGBA #96-12029, NAMGBR #7-3336
|