mg-t
[Top] [All Lists]

RE: XPAG Distributor

To: cgrunau@pathcom.com, jswanland@gw.wesley.vic.edu.au, DGeis@aol.com
Subject: RE: XPAG Distributor
From: Lewis Palmer <lpalmer@vanstar.com>
Date: Wed, 3 Mar 1999 18:14:34 -0800
I guess if I'd read before I'd replied, I needn't have answered. Guess that
confirms it, 11 61 id the date.

Lew

                -----Original Message-----
                From:   Bob and Carolyn Grunau [mailto:cgrunau@pathcom.com]
                Sent:   Wednesday, March 03, 1999 7:39 PM
                To:     jswanland@gw.wesley.vic.edu.au; DGeis@aol.com
                Cc:     mg-t@autox.team.net
                Subject:        Re: XPAG Distributor

                Most likely a Bugeye Sprite generator if it has a tack
drive. May or may
                not have a removeable brush cover.
                 Yes, 11 61 is Nov.1961 manufacture date.. 
                My books are not that new to reference the number.
                Bob G.

                ----------
                > From: John Swanland <jswanland@gw.wesley.vic.edu.au>
                > To: DGeis@aol.com
                > Cc: mg-t@autox.team.net
                > Subject: Re: XPAG Distributor
                > Date: Wednesday, March 03, 1999 8:18 PM
                > 
                > I would guess that 11 61 is the manufacturing date of the
generator
                > 
                > does it have a tachometer drive on the back?
                > 
                > John Swanland
                > TC 7557
                > 
                >  Unfortunately mine reads as follows:
                >                                             L  U  C  A  S
                >                                         22721A   11   61
                >                                         C40 DA 53    12V
                > 
                > Bob Grunau, or anyone:  Do you know what this generator is
from?  It
                > seems
                > 
                > >
                > 

<Prev in Thread] Current Thread [Next in Thread>