In a message dated 12/11/02 08:17:11 Pacific Standard Time,
dmdwyer@optusnet.com.au writes:
<< I got some a while ago for TA Terry - if you want I'll see if the fastener
> place still has them. Size is 1/4 BSF X 1" long. >>
Dave, I've shared some of these around with the other boys but they are 1 1/2
" long......do you see any problem with leaving them that long?
Would you recommend that the sharp hollow ground point be ground off before
using them? I'm thinking of using nylock nuts to further prevent things from
loosening......
Thanks again for these....
Tom, If you only need 3, send the other one back and then I'll have another
set of 4 for a P or N type.....
Cheers
Terry
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/cgi-bin/majorcool
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mg-mmm
/// Send list postings to mg-mmm@autox.team.net
|