Hi Bob,
I did some carbs a few years ago with new bronze bushes. After a while
there was
already some wear on the new shafts. The big return makes the problem
worse.
A small spring on the second carb does help and makes the tuning a lot
easier.
I have no experience with the oilite bronze.
Stefaan
Robert Grunau wrote:
>
> HiStefaan,
> Why use an aluminum bush? I thought a bronze oilite bush would be better.
> Bob Grunau
>
> Hi MMM Friends,
>
> When rebushing the carbs take care to do this with a aluminium bush and
> make it
> a very light push fit. Then loctite it in. Otherwise you will split the
> housing.
> There are of course repair kits for this but they are quite expesive for
> what you actually need.
>
> Stefaan
> > Dear MMM Friends, I have a worn throttle shaft on my SU Carb. Should I
> bush it
> > or ream it and go with oversized shaft? Thanks Kevin
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.365 / Virus Database: 202 - Release Date: 5/24/02
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/cgi-bin/majorcool
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mg-mmm
/// Send list postings to mg-mmm@autox.team.net
|