Thanks everybody for the info.
Gary, I have the actual drawings of the Vesco coupler courtesy of
Rick and Don several years ago and it looks nice and strong and good
compliance. John, I have discussed the coupler issue with Tom and
Gene some time ago. Their coupler idea without the fluid damper is
roughly where I have ended up using Mark Williams coupler materials
and quite a bit of trial and error in design and build of the coupler
. I don't think that I can eliminate torsional harmonics with a fluid
damper so I don't use one.....Nolan and Rick White used a simple chain coupler.
I have found, so far, that compliance must be considered before there
can be a harmonic issue related to breaking a crankshaft. In other
words, without enough compliance the engines will kill each other
before the harmonics get going.
I will see what happens.
Thanks again for all the help.
Skip
At 10:37 PM 3/23/2010, Ellen Wilkinson wrote:
>Skip
>You might contact Rick Vesco the Turbinator started out with two
>small blocks connected together. Hope you and Joyce are well
>
>Gary
>----- Original Message -----
>From: <mailto:Saltrat@pahrump.com>Skip Higginbotham
>To: <mailto:land-speed@autox.team.net>land-speed@autox.team.net
>Sent: Tuesday, March 23, 2010 2:42 PM
>Subject: [Land-speed] Multiple Engines
>
>List,
>
>When connecting two engines together at the crankshafts, what is the
>best offset to use? My thought is that harmonics should be arranged
>such that the rear crankshaft gets as little abuse as possible. Ideas?
>
>Thanks,
>Skip
_______________________________________________
Land-speed@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|