That was going to be my next step. I figured I could use a female heims joint
for the pedal end, and a cut-off grade 8 bolt with a jam nut for the rod
itself. Looks like a trip to Ace Hardware on Tuesday.
DickJ
--- On Sun, 5/24/09, Doug Odom <dlodom@charter.net> wrote:
From: Doug Odom <dlodom@charter.net>
Subject: Re: [Land-speed] brake part needed
To: "Dick J" <lsr_man@yahoo.com>, "lsr list autox"
<land-speed@autox.team.net>
Date: Sunday, May 24, 2009, 5:26 PM
Dick, Just make your own. If you can't, just send me a drawing and I will make
you one. You can spend more time messing around looking for one than it takes
to make one. Doug in big ditch
Subject: [Land-speed] brake part needed
> Does anybody know where I can find a master cylinder brake pedal push rod
> (manual brakes) for a 1978 Firebird. I have looked all over the intenet
and
> in every catalog I can find. My local dealer get's a "deer in the
headlights
> stare" when I mention a model older that 2005!
>
> thanks,
> DickJ
> In east Texas
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Land-speed mailing list
http://autox.team.net/mailman/listinfo/land-speed
|