land-speed
[Top] [All Lists]

Re: Ford Axle Housings

To: Dick J <lsr_man@yahoo.com>, John Beckett <saltracer@servusa.com>,
Subject: Re: Ford Axle Housings
From: W S Potter <wester6935@comcast.net>
Date: Wed, 19 Nov 2003 18:09:46 -0700
Dick,

Just warms your heart to hear stories like that!  See what you get for being
a nice guy?

Wes

on 11/19/03 3:55 PM, Dick J at lsr_man@yahoo.com wrote:

> Who said you can't teach an old dog new tricks.  After screwing around with GM
> rear ends for the last five years, I got frustrated this morning, decided to
> take EVERYBODY's advice, and switch over to a 9" Ford.  I went to my favorite
> U-pull-it junk yard and asked for a 9" Ford.  "For what?"  he asked.  Well,
> needless to say, I hadda do a lot of explaining.  The old guy smiled, walked
> me out to the shed, and showed me a nice Lincoln Versailles unit complete with
> 2.47 gears and disc brakes. I shuddered at what the price was going to be.
> This thing was so low mileage that it didn't even have dirt on it, much less
> rust. It still had paper tags on it!  He smiled and asked if it was really
> going into a Studebaker, to which I answered yes.  "And it's really gonna be a
> race car?, again I answered yes.  "And you sure 'nuff race on them Bonneville
> salt flats? again I answered yes.  "Gimme a hunnert bucks!" he said, and I
> about dropped on the floor.  He smiled and I heard him mumble so!
> mething
> about he had a '53 Stude back whe, and they are really cool cars.  That's
> cheaper than the parts that I needed to set up the GM, AND - it's three inches
> narrower - - - -hello, my wheels will now fit INSIDE the fenders without
> resorting to black magic and voodoo.   Yahooo, I'm back to work on the Studie
> now!
> Dick J in East Texas
> 
> ps:  I'm hoping I have the torque to pull 2.43s.  But then, blown hemis on
> fuel have a pretty good reputation in the torque department.
> 
> 
> 
> John Beckett <saltracer@servusa.com> wrote:
> 2.47 is the best your gonna get (big T-birds and Lincolns etc.) if you got
> the torque to pull that kind a gear. So your gonna have to spend some more
> time digging in the bone yard. If 6000 RPM is all you got then a 3.0 gear is
> only 166 MPH. If your looking to avoid narrowing the housing look for a 67
> to 70 Mustang with a big V-8. All the others had 8"ers. Oh yeah try a
> Lincoln Versailles too.
> 
> JB





<Prev in Thread] Current Thread [Next in Thread>