land-speed
[Top] [All Lists]

Re: Battery Help

To: "Albaugh,Neil" <albaugh_neil@ti.com>
Subject: Re: Battery Help
From: "Thomas E. Bryant" <saltracer@awwwsome.com>
Date: Wed, 19 Nov 2003 14:21:54 -0800
Neil,

Thanks!! An excellent explanation of the battery ratings and their 
effect on application. This is a keeper!

Tom, Redding CA - #216 D/CC


>>There is little relationship between CCA and amp-hours (A-H).
>>Cold Cranking Amps is influenced by a battery's internal resistance. 
>>The lower the internal resistance, the higher the current it can 
>>deliver to a load. Battery construction and battery type influence 
>>internal resistance. More lead & short, heavy cell connections make 
>>a lead-acid battery's internal resistance lower. 
>>Even relatively small Ni-Cad batteries with vented-cell construction
>>typically have extremely high peak current capability due to their 
>>very low internal resistance. Their amp-hour rating isn't high but 
>>they can deliver a great burst of current for a short time. For 
>>example, Ni-Cad missile batteries had a rating of only 4 Amp-Hours 
>>but they could put out 18 amps for 6 minutes. Their short-circuit 
>>current could fry a small screwdriver.
>>Amp-Hour ratings are based on the time it takes to discharge a 
>>battery (to a certain voltage) with a lighter load. Batteries 
>>optimized for A-H performance are like a deep-discharge battery 
>>while batteries optimized for CCA are the types that are used for 
>>starter motors. Some types are a compromise between the two.
>>The battery manufacturer should be able to furnish both CCA & A-H ratings
>>for their batteries. 
>> Regards, Neil    Tucson, AZ





<Prev in Thread] Current Thread [Next in Thread>