Jim, List
If you have to run the pinion speed really high (like 14 or 15K)......don't
forget Pro-Blend!!! It makes the oil stay on the bearings..does it at lower
speeds too!
Skip
At 12:55 PM 11/13/01 -0800, you wrote:
>Hi all,
> It's not just the power requirements that make a 4.88 bad it's the fact
>that you have to overdrive the pinion so much to get a usable ratio. If you
>put in a 2/1 QC set to get a 2.44 ratio you get 14,00 RPM at the pinion gear
>at 7,000 RPM in high gear. It's really hard on the bearings.
>Jim in Palmdale
///
/// land-speed@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe land-speed
///
/// or go to http://www.team.net/cgi-bin/majorcool
///
///
|