Skip, You can get a license plate holder that folds down (or up) for a
few bucks from the auto parts store. The kind that they use when the gas
tank filler is behind the plate. Then you don't even have to remove the
plate. Works neat. For Australia we installed a receiver on the front of
a Yamaha Quad runner and used the same push
bar. Doug Odom in big ditch
Skip & Joyce Higginbotham wrote:
>
> Keith,
> Mine attaches to the bumper after removing the license plate.....easy. It
> is about 30" wide and 15" or so tall and 3/4' plywood braced a little in
> back of it with 2X4s. To avoid the car (liner), chutes etc. we push on a
> tube out the back of the car with a horizontal roller at the end. The
> roller lets the car move around a bit without getting it sideways.
> For Gary's car we push on the outer bumper section outboard of the chute.
> Lots of pics are around?
> So far so good.
> Skip H
///
/// land-speed@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe land-speed
///
///
|