In a message dated 12/18/2000 6:20:57 AM Pacific Standard Time,
john@engr.wisc.edu writes:
<< I had the engine on White Heat checked via ATF last year and did not have
a
problem with the head gasket afterwards...spun the engine to spray oil
everywhere afterwards too...my engine uses the stock Felpro gasket and the
block is o-ringed with .040 stainless wire.
>>
Group,
To minimize the problem of checking fluid fouling everything in the area
when you pump it out of the cylinder after the test, why not fashion a
contraption from a spark plug and a length of 1/4"-1/2" hose that will direct
the fluid back into a container when the engine is turned
over?.............Ardun Doug King
|