Rich,
While I don't pretend to be highly technical I think the addition of a dash
hoop, shoulder bars and hoop/hoops with proper bracing would change your bar
system to a cage that would fit the parameters required. You are welcome to
contact Steve Batchelor at (661) 944-9676 for more direction. If you were
down here I could send you over to Rich Manchen for more input.
Dan W
----- Original Message -----
From: <V4GR@aol.com>
To: <dwarner@electrorent.com>
Sent: Monday, February 21, 2000 9:23 AM
Subject: Re: /MS rules
> Dan; I know you have heard enough of this but-I got my 2000 rule book and
it
> is mostly the same. The guy who originally brought this up points out that
on
> page 22 III-2 says "All closed cars over 175 MPH must have a full roll
cage."
> Than as you pointed out on page 23 the structure depicted in Fig. 1 is
> defined as a Roll Bar. The structure shown in Fig 2 is defined as a Roll
> Cage. As you know my car and most closed cars use the design depicted in
Fig
> 1. This is a point of confusion for someone trying to build a closed car.
> Could this be clarified? Thanks--Rich Fox
>
|