--===============4928270137991831730==
--0000000000001210ef05cf4c2bb1
Listers,
It appears that I may have to pull the head (some oil in the radiator
fluid) on my 66 BJ8 and I may (likely) have to replace the head gasket. I
am going to leave the engine in the car. I have pulled the head of my BJ7
but that was many years ago. I will need help physically (I'm older now)
to pull the BJ8 head. Does anyone know what the *actual weight* of just
the head is? I need to determine how many people I need to help me. Of
course, I will remove everything from the head before pulling it and then
place a straight edge on the head and block to determine if I have
additional issues to deal with. Hopefully not but I will check.
Do I use sealant on the new head gasket and if so what type? One side or
both sides?
After the recent discussion on Moss and their prices and quality, what are
the thoughts about sources for a good quality head gasket, without being
gouged. Entering the cold months, I have plenty of time to do this right.
Is there anything I should be on the lookout for, or check before buttoning
up things?
I want to do this just once but I do want to do it completely and
correctly. So, any words of wisdom are certainly appreciated.
Thanks as always,
Fred
66BJ8
--0000000000001210ef05cf4c2bb1
Content-Transfer-Encoding: quoted-printable
<div dir=3D"ltr">Listers,<div><br></div><div>It appears that I may have to =
pull the head (some oil in the radiator fluid) on my 66 BJ8 and I may (like=
ly) have to replace the head gasket.=C2=A0 I am going to leave the engine i=
n the car.=C2=A0 I have pulled the head of my BJ7 but that was many years a=
go.=C2=A0 I will need help physically (I'm older now) to pull the BJ8 h=
ead.=C2=A0 Does anyone know what the <b>actual weight</b> of just the head =
is?=C2=A0 I need to determine how many people I need=C2=A0to help me.=C2=A0=
Of course, I will remove everything from the head before pulling it and th=
en place a straight edge on the head and block to determine if I have addit=
ional issues to deal with.=C2=A0 Hopefully not but I will check.=C2=A0=C2=
=A0</div><div><br></div><div>Do I use sealant=C2=A0on the new head gasket a=
nd if so what type?=C2=A0 =C2=A0One side or both sides?</div><div><br></div=
><div>After the recent discussion on Moss and their prices and quality, wha=
t are the thoughts about sources for a good quality head gasket, without be=
ing gouged.=C2=A0 Entering the cold months, I have plenty of time to do thi=
s right.=C2=A0 Is there anything I should be on the=C2=A0lookout for, or ch=
eck before buttoning up things?=C2=A0</div><div><br></div><div>I want to do=
this just once but I do want to do it completely and correctly.=C2=A0 So, =
any words of wisdom are certainly appreciated.<br></div><div><br></div><div=
>Thanks as always,</div><div><br></div><div>Fred</div><div>66BJ8</div></div=
>
--0000000000001210ef05cf4c2bb1--
--===============4928270137991831730==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
--===============4928270137991831730==--
|