--===============6020799078773400095==
--0000000000000542a705c4f8c965
Actually Bob even that is too much ... resistance just before the cap
reaches the threads is sufficient. At that level I find that the oil never
goes away.
On Thu., Jun. 17, 2021, 10:34 a.m. Bob Spidell, <bspidell@comcast.net>
wrote:
> My observation as well. I fill them until you feel resistance when the cap
> is about a half inch from the top of the carb.
>
>
> On 6/16/2021 10:47 PM, Alan Seigrist via Healeys wrote:
>
> Roger -
>
> you don't need that much oil in the HD8 pistons for this to work
> correctly. HD8s throw all excess oil out the vent... so if you are
> overfilling it will all go out anyway.
>
> The main thing to check is to take the dampers out and slide them back in
> with the shaft straight up, and if you feel resistance toward the
> bottom.... you don't need to refill. I suspect you are overthinking it. I
> used to think HD8s use too much oil until I realised they don't need all
> that much to work correctly.
>
> Cheers,
>
> Alan
>
> On Thu, Jun 17, 2021 at 12:59 AM Roger Grace via Healeys <
> healeys@autox.team.net> wrote:
>
>> Ok have spoken to Joe who was most helpful.
>> We did some measurements together over the phone and established that my
>> dampers are correct.
>> He says that he has encountered this before but not sure of the reason.
>> Suggests that I run the dashpots dry then start again.
>> In meantime he will do more research.
>> rg
>>
>>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>
>
--0000000000000542a705c4f8c965
Content-Transfer-Encoding: quoted-printable
<div dir=3D"auto">Actually Bob even that is too much ... resistance just be=
fore the cap reaches the threads is sufficient.=C2=A0 At that level I find =
that the oil never goes away.<div dir=3D"auto"><br></div><div dir=3D"auto">=
<br></div></div><br><div class=3D"gmail_quote"><div dir=3D"ltr" class=3D"gm=
ail_attr">On Thu., Jun. 17, 2021, 10:34 a.m. Bob Spidell, <<a href=3D"ma=
ilto:bspidell@comcast.net">bspidell@comcast.net</a>> wrote:<br></div><bl=
ockquote class=3D"gmail_quote" style=3D"margin:0 0 0 .8ex;border-left:1px #=
ccc solid;padding-left:1ex">
=20
=20
=20
<div>
My observation as well. I fill them until you feel resistance when
the cap is about a half inch from the top of the carb.<br>
<br>
<br>
<div>On 6/16/2021 10:47 PM, Alan Seigrist
via Healeys wrote:<br>
</div>
<blockquote type=3D"cite">
=20
<div dir=3D"ltr">
<div dir=3D"ltr">Roger -
<div><br>
</div>
<div>you don't need that much oil in the HD8 pistons for this
to work correctly.=C2=A0 HD8s throw all excess oil out the
vent... so if you are overfilling it will all go out anyway.</d=
iv>
<div><br>
</div>
<div>The main thing to check is to take the dampers out and
slide them back in with the shaft straight up, and if you
feel resistance toward the bottom.... you don't need to
refill.=C2=A0 I suspect you are overthinking it.=C2=A0 I used t=
o think
HD8s use too much oil until I realised they don't need all
that much to work correctly.</div>
<div><br>
</div>
<div>Cheers,</div>
<div><br>
</div>
<div>Alan</div>
</div>
<br>
<div class=3D"gmail_quote">
<div dir=3D"ltr" class=3D"gmail_attr">On Thu, Jun 17, 2021 at
12:59 AM Roger Grace via Healeys <<a href=3D"mailto:healeys@=
autox.team.net" target=3D"_blank" rel=3D"noreferrer">healeys@autox.team.net=
</a>>
wrote:<br>
</div>
<blockquote class=3D"gmail_quote" style=3D"margin:0px 0px 0px 0.8=
ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
<div dir=3D"ltr">
<div>Ok have spoken to Joe who was most helpful.<br>
</div>
<div>We did some measurements together over the phone and
established that my dampers are correct.</div>
<div>He says that he has encountered this before but not
sure of the reason.<br>
</div>
<div>Suggests that I run the dashpots dry then start
again.</div>
<div>In meantime he will do more research.</div>
<div>rg<br>
</div>
</div>
<div id=3D"m_-1209655407184456216gmail-m_-7533876899210611790DA=
B4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2"><br>
</div>
</blockquote>
</div>
</div>
<br>
</blockquote>
<br>
</div>
_______________________________________________<br>
rer noreferrer" target=3D"_blank">http://www.team.net/donate.html</a><br>
<br>
Archive: <a href=3D"http://www.team.net/pipermail/healeys"; rel=3D"noreferre=
r noreferrer" target=3D"_blank">http://www.team.net/pipermail/healeys</a> <=
a href=3D"http://autox.team.net/archive"; rel=3D"noreferrer noreferrer" targ=
et=3D"_blank">http://autox.team.net/archive</a><br>
<br>
<a href=3D"mailto:Healeys@autox.team.net"; target=3D"_blank" rel=3D"noreferr=
er">Healeys@autox.team.net</a><br>
<a href=3D"http://autox.team.net/mailman/listinfo/healeys"; rel=3D"noreferre=
r noreferrer" target=3D"_blank">http://autox.team.net/mailman/listinfo/heal=
eys</a><br>
<br>
s/michaelsalter@gmail.com" rel=3D"noreferrer noreferrer" target=3D"_blank">=
http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com</a><b=
r>
<br>
</blockquote></div>
--0000000000000542a705c4f8c965--
--===============6020799078773400095==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
--===============6020799078773400095==--
|