healeys
[Top] [All Lists]

Re: [Healeys] Fwd: Broken Screw

To: "rrengineer.mike@att.net" <rrengineer.mike@att.net>, "healeyrik@gmail.com" <healeyrik@gmail.com>, "boyracer466@gmail.com" <boyracer466@gmail.com>
Subject: Re: [Healeys] Fwd: Broken Screw
From: Larry Wendland via Healeys <healeys@autox.team.net>
Date: Wed, 27 May 2020 01:20:33 +0000 (UTC)
Cc: "healeys@autox.team.net" <healeys@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: healeys@autox.team.net
References: <1710121800.979015.1590433275728.ref@mail.yahoo.com> <1710121800.979015.1590433275728@mail.yahoo.com> <CAKkXjqORCJT25bUbyFNCOWyuoR9p-AxjVEfo5arW2eP-1zNiJA@mail.gmail.com> <CAKkXjqNVRBGHSSejS752XvNaeOhCD8riDS=VR-KzyHERpiYxhA@mail.gmail.com> <CAGfzsZdf7=f8crq23iTVZbB0qqeaJho7=gMRZRJdGcYynG22AA@mail.gmail.com> <728887422.115356.1590531005068@mail.yahoo.com> <938056538.188319.1590541802800@mail.yahoo.com> <865558167.210624.1590542186987@mail.yahoo.com> x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/83.0.4103.61 Safari/537.36
Mike, So much for my solution. The box beam negates my idea. 
Good luck. Larry



-----Original Message-----
From: Michael MacLean <rrengineer.mike@att.net>
To: healeyrik@gmail.com <healeyrik@gmail.com>; boyracer466@gmail.com 
<boyracer466@gmail.com>; Larry Wendland <bighealey3k@aim.com>
Cc: healeys@autox.team.net <healeys@autox.team.net>
Sent: Tue, May 26, 2020 9:16 pm
Subject: Re: [Healeys] Fwd: Broken Screw




        
This cross piece has captive nuts in a rectangular box tubing.  There is a 
seam on the top and bottom.  The captive nuts are welded in place prior to 
putting the two halves together.  No access to the screw from the rear.
Mike



                

            
                                
                    On Tuesday, May 26, 2020, 6:10:11 PM PDT, Larry Wendland 
<bighealey3k@aim.com> wrote:                
                


                


                
Mike are there any threads sticking out on the backside of the nut? If so you 
might be able to break the bolt remnant loose with a vise grip .If it is 
threaded full length, you could continue to turn it till it comes out on the 
back side of the nut. At worst screw it back out on the front side of the nut.
Larry Wendland
'67 BJ8


-----Original Message-----
From: Michael MacLean <rrengineer.mike@att.net>
To: healeyrik@gmail.com <healeyrik@gmail.com>; richard mayor 
<boyracer466@gmail.com>
Cc: healeys <healeys@autox.team.net>
Sent: Tue, May 26, 2020 6:10 pm
Subject: Re: [Healeys] Fwd: Broken Screw


As appealing as that sounds to shoot it out, with my resources drilling it out 
is my only option.  If I (if you'll pardon the pun) screw it up, it will have 
to have a larger hole cut out and the J&B Weld a blind nut insert in there.  A 
little paint and then who will know?  Nothing is easy on this car.
Mike MacLean


Sent from AT&T Yahoo Mail on Android
 
  
 
On Tue, May 26, 2020 at 2:59 PM, HealeyRick
<healeyrik@gmail.com> wrote:
 
 

 _______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: 
http://autox.team.net/mailman/options/healeys/rrengineer.mike@att.net



 

 


_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: 
http://autox.team.net/mailman/options/healeys/bighealey3k@aim.com




            
        

_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: 
http://autox.team.net/mailman/options/healeys/mharc@autox.team.net

<Prev in Thread] Current Thread [Next in Thread>