Sears has a Craftsman 2-3/16 in. 12 pt. ? drive socket for $16.99. Would
this work on the bearing retainer nut?
Mel
On 6/8/2018 1:41 AM, simon.lachlan at alexarevel.plus.com wrote:
> The bearing retainer nuts are two and three sixteenths of an inch.
> Not sure where you are but I just went to my local tool place and ordered
> that size socket. Octagonal.
> You are aware that the RHS nuts are RHT and those on the LHS are LHT?
> Simon
>
> -----Original Message-----
> From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of John
> O'Brien
> Sent: 08 June 2018 00:23
> To: Healeys at autox.team.net
> Subject: [Healeys] rear axle wheel bearing locknut wrench?
>
> Hi all:
>
> I am trying to replace a leaky wheel bearing seal in my "65 BJ8. The nut that
> locks the hub on is an 8 sided nut that I measured to be 2.1825"
> across the flats. Where do you get a socket to remove that nut. My original
> Healey workshop manual shows a special service tool in the back for that
> purpose, but I don't have that.
>
> Any other way of removing that nut? according to the Moss catalog it should
> be a left hand thread in the left side of the car where I am working.
>
> Thanks for any collective wisdom.
>
> John O'Brien
>
> '65 BJ8
>
> '61 Bugeye
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html Suggested annual donation
> $12.75
>
> Archive: http://www.team.net/pipermail/healeys
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/simon.lachlan at
> alexarevel.plus.com
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
>
> Archive: http://www.team.net/pipermail/healeys
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/healey3776
> at gmail.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20180608/b6be46e9/attachment.html>
|