The petrol tank is earthed by the feed pipe to the fuel pump, and all the
way to the engine at numerous points.
Mark Donaldson
Ardmore
NZ
_____
From: Don Hardie [mailto:healeynut2 at gmail.com]
Sent: Saturday, 19 May 2018 12:38 p.m.
To: Alan Seigrist
Cc: Healey list
Subject: Re: [Healeys] BN2 Fuel Tank
An earth wire from one of the sender screws to the somewhere on the body is
a good idea to make sure tank is earthed.
Don Hardie
Central Coast Australia
On Fri, May 18, 2018 at 4:48 PM, Alan Seigrist <healey.nut at gmail.com> wrote:
At some point, however, the tank must have metal to metal contact somewhere
to prevent static charge build up and also to make sure the gas guage works.
On Tue, May 15, 2018 at 9:39 PM, Bob Spidell <bspidell at comcast.net> wrote:
Get some reinforced rubber stock--places like Orchard Supply (maybe Lowe's,
HD, etc.) sell it--and put a couple strips front to back to level the tank
and keep it off the boot pan.
BTW, if the tank hold-down straps have evenly-spaced holes they're for
copper rivets to hold a thick canvas-like padding. You don't want the
straps rubbing against the tank either (substitute rubber if you like).
Bob
_______________________________________________
<http://www.team.net/donate.html> html
Archive: http://www.team.net/pipermail/
<http://www.team.net/pipermail/healeys> healeys
Healeys at autox.team.net
http://autox.team.net/mailman/
<http://autox.team.net/mailman/listinfo/healeys> listinfo/healeys
<http://autox.team.net/mailman/options/healeys/healeynut2 at gmail.com>
options/healeys/healeynut2 at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20180520/99be5f76/attachment.html>
|