If the relay points were stuck, then the gearshift switch should disengage
the O/D whenever you are not in 3rd or 4th.
The only time my O/D has ever failed to disengage, it was because of the oil
I used. It was Accel brand (Walmart) 30W non-detergent. This problem was
solved by merely by draining and refilling with a better oil.
Steve Byers
HBJ8L/36666
BJ8 Registry
AHCA Delegate at Large
Havelock, NC?
-----Original Message-----
From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of
healeymanjim
Sent: Thursday, April 26, 2018 12:35 AM
To: healeys at autox.team.net
Subject: [Healeys] o/d relay
my overdrive is always engaged. i checked the dash switch and it is good.
i am assuming the relay is the problem. have
cleaned it up and sanded the points but no joy. anything else it might be?
|