Or better yet us and Easy Out or similar screw extraction method. Google Easy
Out and several methods show up. Good Luck.
Larry
'67 BJ8
-----Original Message-----
From: i erbs <eyera3000 at gmail.com>
To: Robert Begani <rfbegani at gmail.com>
Cc: Ahealey help <healeys at autox.team.net>
Sent: Sun, Feb 4, 2018 3:37 am
Subject: Re: [Healeys] Emergency brake bracket
I would get a dremmel and cut slots in the screw then spray anti rust
penetrant, then apply heat if you can, carefully unscrew the screws.
Ira Erbs
Portland, OR
On Feb 3, 2018 5:14 PM, "Robert Begani" <rfbegani at gmail.com> wrote:
Hi David:
Just so happens I have the Tunnel available for your viewing pleasure. See
attached photos of the bracket.? My emergency brake has not been on the car
for several years as the cable broke.? I could not put the brake on the
bracket because the head of one of the screws was drilled out to get it off.
My next project is to get the frozen screw out and then find a reasonable
replacement.
Regards,
Bob Begani
BJ8 67
_______________________________________________
Archive: http://www.team.net/archive
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys
_______________________________________________
Archive: http://www.team.net/archive
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|