I would get a dremmel and cut slots in the screw then spray anti rust
penetrant, then apply heat if you can, carefully unscrew the screws.
Ira Erbs
Portland, OR
On Feb 3, 2018 5:14 PM, "Robert Begani" <rfbegani at gmail.com> wrote:
> Hi David:
>
> Just so happens I have the Tunnel available for your viewing pleasure. See
> attached photos of the bracket. My emergency brake has not been on the car
> for several years as the cable broke. I could not put the brake on the
> bracket because the head of one of the screws was drilled out to get it
> off.
> My next project is to get the frozen screw out and then find a reasonable
> replacement.
>
> Regards,
>
> Bob Begani
> BJ8 67
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/healeys/eyera3000 at gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20180203/e69e5052/attachment.html>
|