[Healeys] Pressure Release Valves--old versus new

Subject:	[Healeys] Pressure Release Valves--old versus new
From:	michael.oritt at gmail.com (Michael Oritt)
Date:	Sun, 15 Oct 2017 16:38:48 -0400

Here's a pic of the two valves--the new one is on the left and though it
may not show in the photo there is .0010" difference in the wall thickness
which I believe allowed the new valve to expand when it got hot and jam in
the passageway, resulting in lower OP.

Best--Michael Oritt
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/healeys/attachments/20171015/9d215713/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: PressureReleaseValves.jpg
Type: image/jpeg
Size: 1963741 bytes
Desc: not available
URL: 
<http://autox.team.net/pipermail/healeys/attachments/20171015/9d215713/attachment.jpg>

<Prev in Thread]	Current Thread	[Next in Thread>
[Healeys] Pressure Release Valves--old versus new, Michael Oritt <= [Healeys] Pressure Release Valves--old versus new, Herb Miller

Previous by Date:	[Healeys] Torque Settings Needed--Conclusion and Lesson Learned, Michael Oritt
Next by Date:	[Healeys] Torque Settings Needed--Conclusion and Lesson Learned, Michael MacLean
Previous by Thread:	[Healeys] Torque Settings Needed--Conclusion and Lesson Learned, Michael Oritt
Next by Thread:	[Healeys] Pressure Release Valves--old versus new, Herb Miller
Indexes:	[Date] [Thread] [Top] [All Lists]