Ray,
This NOS one should have come with these parts. Mine did, but this one
obviously does not. There is a bearing which I believe can be sourced
commercially, and Star Auto should know how to source this. Also you should
be able to save these parts from your broken DE bracket. They are held in
place by three tube rivets which I sourced commercially years ago.
Plate, bearing 238396
Washer, corrugated bearing 238565
Washer, dished 238564
Bearing, drive end 189308
[image: Inline image 1]
BTW what is the part number and the date of your generator? The part no.
should be 22483B/D and the date is month and year, e.g. mine is 10 54 on a
11 Jan. '55 built car.
The generators for 100s are as follows...
1953 22456A/B
1954 22456A/B
1955 22483A
1956 22483B
All of these generator where subsequently replaced by part no. 22489
Cheers,
Curt
On Tue, Oct 10, 2017 at 7:22 PM, Ray Juncal <healeyray at yahoo.com> wrote:
> Done. Can Can I get the washer, bearing and bearing plate off my old part?
> I haven't taken it apart yet so I don't know what I'm looking at.
>
>
> ------------------------------
> *From:* Curtis Arndt <cnaarndt at gmail.com>
> *To:* Ray Juncal <healeyray at yahoo.com>
> *Sent:* Tuesday, October 10, 2017 6:13 PM
> *Subject:* Re: [Healeys] Generators
>
> Buy this bracket!
>
> http://www.ebay.com/itm/Aluminum-NOS-Generator-
> Bracket-Plate-239012-Triumph-MG-Jaguar-/263231178138?hash=
> item3d49cd059a:g:yjsAAOSwcyZZyrFy&vxp=mtr
>
> Now you will still need the bearing bearing plate, washer and rivets, but
> I can give you the part numbers.
>
> Curt
>
> On Tue, Oct 10, 2017 at 6:07 PM, Ray Juncal <healeyray at yahoo.com> wrote:
>
> Good info Curt, this is such a great list. I was going to Star for the
> rebuild and thought it would be better if I went with the replacement parts
> in hand. I need both ends but the car is nowhere near 100 points so
> anything close will look OK. I am about to get all over e-bay with the info
> you have provided. Much thanks to all who responded to my request.
> Thanks you guys
> Ray Juncal
>
>
> ------------------------------
> *From:* Curtis Arndt <cnaarndt at gmail.com>
> *To:* Tom Felts <tomfelts at windstream.net>; Ray Juncal <healeyray at
> yahoo.com>
>
> *Cc:* Oudesluys <coudesluijs at chello.nl>; Healey List <
> healeys at autox.team.net>
> *Sent:* Tuesday, October 10, 2017 5:31 PM
> *Subject:* Re: [Healeys] Generators
>
> Ray
>
> The number cast into the bracket ear on the back of bracket 239266 is
> 239013 (go figure?). These typically ALL have the brass oiler on them, and
> the later brackets on BN2s do not. But this is not a big deal, as I prefer
> the ones with the bushing oiler.
>
> [image: Inline image 1]
> These typically run $45 to $65 on eBay. None listed right now but be
> patient.
>
> The front bracket is *"Bracket or frame, drive end"* and is Lucas part
> no. *239012. *These are a bit harder to find.
>
> Also, have you tried the good folks at Star Auto Electric in Los Angeles?
> They should be able to fix you up.
>
> http://www.starautoelectric.co m/ <http://www.starautoelectric.com/>
>
>
> *207 W Foothill Blvd
> <https://maps.google.com/?q=207+W+Foothill+Blvd+**Monrovia,+CA+91016&entry=gmail&source=g>*Monrovia,
> CA 91016
> <https://maps.google.com/?q=207+W+Foothill+Blvd+**Monrovia,+CA+91016&entry=gmail&source=g>
> (866) 969-7827
>
> Cheers,
>
> Curt
>
> On Tue, Oct 10, 2017 at 4:35 PM, Curtis Arndt <cnaarndt at gmail.com> wrote:
>
> These generator end plates are quite common and I've purchased plenty of
> them NOS off of eBay over the years.
>
> You're specifically looking for a *"Bracket or frame, commutator end"* or
> try this in an eBay search "Lucas generator commutator end plate or
> bracket" NOS good, as I find these for sale quite often.
>
> The Lucas part no. for a 22456A/D or a 22383A/B/D generator is *239266*.
>
> Cheers,
>
> Curt
>
> On Tue, Oct 10, 2017 at 12:27 PM, Tom Felts <tomfelts at windstream.net>
> wrote:
>
> I had mine welded back on.
>
> ---- Oudesluys <coudesluijs at chello.nl> wrote:
>
> =============
> Fit an alternator!
> Kees Oudesluijs
>
>
> Op 10-10-2017 om 7:25 schreef Ray Juncal:
> > I have broken mounting tabs on both front and rear end plates of my
> > BN-1 generator. I want to send it out for a complete rebuild. What is
> > the best way to deal with the broken end plates? Anyone have a burned
> > up generator they want to sell the end plates off of?, or how about a
> > complete rebuildable four cylinder generator. What is the wisdom of
> > the list?
> > Thanks
> > Ray Juncal
> >
> >
> >
> > ______________________________ _________________
> > Support Team.Net http://www.team.net/donate.htm l
> <http://www.team.net/donate.html>
> > Suggested annual donation $12.75
> > Archive: http://www.team.net/archive
> > Forums: http://www.team.net/forums
> >
> > Healeys at autox.team.net
> > http://autox.team.net/mailman/ listinfo/healeys
> <http://autox.team.net/mailman/listinfo/healeys>
> >
> > Unsubscribe/Manage: http://autox.team.net/mailman/
> options/healeys/coudesluijs at ch ello.nl
> <http://autox.team.net/mailman/options/healeys/coudesluijs at chello.nl>
> >
>
>
> ______________________________ _________________
> Support Team.Net http://www.team.net/donate.htm l
> <http://www.team.net/donate.html>
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/ listinfo/healeys
> <http://autox.team.net/mailman/listinfo/healeys>
>
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/healeys/cnaarndt at gmail .com
> <http://autox.team.net/mailman/options/healeys/cnaarndt at gmail.com>
>
>
>
>
>
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20171011/cdccf0bd/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: s-l1600.jpg
Type: image/jpeg
Size: 186276 bytes
Desc: not available
URL:
<http://autox.team.net/pipermail/healeys/attachments/20171011/cdccf0bd/attachment-0002.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Generator 239266.jpg
Type: image/jpeg
Size: 4781861 bytes
Desc: not available
URL:
<http://autox.team.net/pipermail/healeys/attachments/20171011/cdccf0bd/attachment-0003.jpg>
|
