"... Do I have to do anything more to the distributor than installing a
negative ground module in place of the positive ground one?"
Call Pertronix tech support. They've always been knowledgeable and helpful for
me. But, the answer is likely no.
Don't forget to swap the leads on your coil, assuming they are correct now.
Bob
--------------------------------
Bob Spidell - San Jose, CA
> On July 31, 2017 at 6:29 PM Mike Tobin <ahbt71 at gmail.com> wrote:
>
> All,
> I've decided to go to an alternator so I have to change the car to
> negative ground. It has a positive ground Pertronix distributor. Do I have
> to do anything more to the distributor than installing a negative ground
> module in place of the positive ground one?
>
> BTW, aided by the kind donation of some shroud material I was able to
> patch my shroud with sound metal. I put the new piece in with my MIG welder.
> After a bit of practice on the donated piece I worked out I could do a
> series of short, basically tack welds without any brunthrough. It looked
> like shit when I was done, but it ground down nicely without distortion.
> Some hammer and dolly work and the repair should be invisible.
>
> Thanks Again,
> Mike Tobin
> Townsend, Montana.
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170731/c3ba09e9/attachment.html>
|