All,
I've decided to go to an alternator so I have to change the car to negative
ground. It has a positive ground Pertronix distributor. Do I have to do
anything more to the distributor than installing a negative ground module
in place of the positive ground one?
BTW, aided by the kind donation of some shroud material I was able to patch
my shroud with sound metal. I put the new piece in with my MIG welder.
After a bit of practice on the donated piece I worked out I could do a
series of short, basically tack welds without any brunthrough. It looked
like shit when I was done, but it ground down nicely without distortion.
Some hammer and dolly work and the repair should be invisible.
Thanks Again,
Mike Tobin
Townsend, Montana.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170731/6ba1ced9/attachment.html>
|