Keith
The "28" you see there means 28% overdrive. Are you sure your drive has
14 teeth. I would have thought it was 15, as that is the standard for
these overdrives. The number of gears on the shaft should be 6, thus
giving you a ratio of 2,5:1.
These units were installed in 100/6, and as far as I know in BN2.
With the 3000 they changed to 22% overdrive and the speedo drive there
was 16/5 thus giving a ratio of 3,2:1.
Per
Den 2016-03-01 kl. 09:17, skrev Keith Taylor:
> I have a BN1 fitted with a BN2 box BUT the overdrive is stamped 28/1469
> which is not listed as Healey
> The problem is that the speedo drive I have is ( 14 teeth) and will not
> engage with the shaft drive
> Different pinions are listed for BN2 to BN6 & another for BN7 & up
> Without knowing what 28/1469 was for I am flying blind
> Any input would be appreciated.
>
> Keith Taylor
> Southern Highlands OZ
>
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/per@schoerner.se
>
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|