[Healeys] Speedo Drive

[Keith Taylor <ktee20@gmail.com>]

--===============4388270613199123041==

--001a113ff3281d34db052cf864c4

I have a BN1 fitted with a BN2 box BUT the overdrive is stamped  28/1469
which is not listed as Healey
The problem is that the speedo drive I have is ( 14 teeth) and will not
engage with the shaft drive
Different pinions are listed for BN2 to BN6 & another for BN7 & up
Without knowing what 28/1469 was for I am flying blind
Any input would be appreciated.

Keith Taylor
Southern Highlands OZ

--001a113ff3281d34db052cf864c4
Content-Transfer-Encoding: quoted-printable

<div dir=3D"ltr"><div>I have a BN1 fitted with a BN2 box BUT the overdrive =
is stamped=C2=A0 28/1469 which is not listed as Healey </div><div>The probl=
em is that the speedo drive I have is ( 14 teeth) and will not engage with =
the shaft drive</div><div>Different pinions are listed for BN2 to BN6 &amp;=
 another for BN7 &amp; up</div><div>Without knowing what 28/1469 was for I =
am flying blind</div><div>Any input would be appreciated.</div><div><br></d=
iv><div>Keith Taylor</div><div>Southern Highlands OZ</div><div><br></div></=
div>

--001a113ff3281d34db052cf864c4--

--===============4388270613199123041==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

_______________________________________________
Archive: http://www.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys



--===============4388270613199123041==--