healeys
[Top] [All Lists]

Re: [Healeys] Engine pulled out of '59 100-6 BN4

To: "I Erbs" <eyera3000@gmail.com>
Subject: Re: [Healeys] Engine pulled out of '59 100-6 BN4
From: "Chris Scholz" <drscholz@visioncenterpc.com>
Date: Mon, 1 Sep 2014 19:09:27 -0500
Cc: Healeys@autox.team.net
Delivered-to: mharc@autox.team.net
Delivered-to: healeys@autox.team.net
References: <68C4B883-C687-452F-8E77-539AEF8A078D@visioncenterpc.com> <CACPMnYqPB97yfG_KS0ovOCZ-DT=-xDA6Ftf=qWZDtuCHUXsh2g@mail.gmail.com>
Thread-index: Ac/GQgPFSnuB3jQmQdCsSIGnuQ5dOg==
Thread-topic: [Healeys] Engine pulled out of '59 100-6 BN4
That sure makes timing difficult on organizing the sandblasting and then the
painting.  How many hours does one estimate to remove the front fenders,
considering the headlights and grill? And I see the windshield would need
removal also.

Sent from my iPhone
Chris Scholz OD

> On Sep 1, 2014, at 3:05 PM, "I Erbs" <eyera3000@gmail.com> wrote:
>
> Any bare metal should be primered immediately as rusting begins within
seconds.... Or so it seems
>
> Ira Erbs
> Portland,OR
> IT Educator and Consultant
> sent from my smartphone. what you get, May not be what I meant to send
>
>> On Sep 1, 2014 10:24 AM, "Chris Scholz" <drscholz@visioncenterpc.com>
wrote:
>> I need some advice. I am overhauling the numbers  matching engine, and
while
>> it is out, I want to strip the engine bay, sandblast it and repaint. There
is
>> bubbling rust at the bottom of both doors, a little on the sills and the
>> bottom of the dog legs on the rear quarters. I am having those items
removed
>> and having the body man weld in new patch panels. The frame is in
excellent
>> shape along with the rest of the car. The paint on the frame is peeling.
I
>> really don't want to remove the front fenders as they are in great shape
with
>> good paint. The car is two tone so it will be easy to repaint the coves
where
>> the patch panels will be.  Is the best way to prep the engine bay and frame
is
>> to take it down to bare metal?  I don't own a sandblaster--by the time I
buy
>> the equipment, I could probably hire it done cheaper. I doubt I can wire
brush
>> every nook and cranny. And how soon should the bare metal be painted here
in
>> humid Iowa?
>>
>> Regarding the front panels which are in great shape, I want this done
right,
>> but I heard it is a pain to remove and refit the front panels.  Do you feel
I
>> can do the engine bay and frame justice if I try to refurbish that area
>> without removing the front panels?  I apologize for the lengthy email!!
>>
>> Sent from my iPhone
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation  $12.75
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>>
>> Healeys@autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/eyera3000@gmail.com
_______________________________________________
Archive: http://www.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


<Prev in Thread] Current Thread [Next in Thread>