healeys
[Top] [All Lists]

Re: [Healeys] BJ8 brake caliper question

To: Tom Felts <tomfelts@windstream.net>,healeys@autox.team.net
Subject: Re: [Healeys] BJ8 brake caliper question
From: Peter Caldwell <peter@nosimport.com>
Date: Thu, 18 Jul 2013 08:45:28 -0500
Delivered-to: mharc@autox.team.net
Delivered-to: healeys@autox.team.net
References: <20130717180452.AK4OG.39565.root@pamxwww10-z01>
Tom,  Replace the hoses as they could be the actual cause, unless you 
are certain they are new.
         Peter C
=
At 05:04 PM 7/17/2013, Tom Felts wrote:
>Had my right caliper pistons seize today causing one HOT set of 
>brake pads and roter.  Pulled them and removed pistons----very dirty 
>as I suspected.  The piston cavities need a good cleaning.
>
>What do you use to make sure this surface is clean and shiny before 
>you replace the new pistons?  Don't want to sand blast---tried a 
>real fine steel wool, but can't get it as clean as I want.
>
>Thanks
>tom
_______________________________________________
Archive: http://www.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


<Prev in Thread] Current Thread [Next in Thread>