Kees,
I respect your expertise.
Could you tell me the specific evidence on which your caution about
powder-coating is based?
What specific effects are there on springs and roll-bars heated at 400
degrees?
Thanks,
Charlie
On May 13, 2013, at 10:38 PM, Oudesluys wrote:
These relatively low temperatures of 400 do effect some some types of spring
steel of springs, anti-roll bars etc. so beware. There are little effects on
other parts.
Kees Oudesluijs
NL
Op 14-5-2013 6:11, Charlie Frazer schreef:
> Thanks to a number of you who expressed your personal opinions on whether
to
> paint or powder coat suspension springs, as well as discussing various
> techniques for media blasting.
>
> My question is this: Does the heat involved in powder coating really
result
> in taking the temper out of springs as suggested in some recent posts?
> I'm not a metallurgist, but it appears to me that the temps in powder
coating
> are around 400 degrees, while springs are tempered at 900-950 degrees. So,
> does the relatively low temperature in the powder coating oven really
affect
> springs? If so, how about A-arms and sway bars?
>
> Thanks for your comments.
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
>
>
>
> -----
> Geen virus gevonden in dit bericht.
> Gecontroleerd door AVG - www.avg.com
> Versie: 2013.0.3336 / Virusdatabase: 3162/6320 - datum van uitgifte:
05/13/13
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://autox.team.net/mailman/options/healeys/cfrazer@jcomm.uoregon.edu
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|