As I mentioned Stephen, I ran a couple of months with the nyloc thin nuts
and they seemed to stay tight however I didn't like the idea very much so
replaced the pins and nuts with good used originals. They just made me feel
better and looked right.
Michael S
On Thu, Feb 14, 2013 at 10:35 AM, Stephen Hutchings
<s.hutchings@rogers.com>wrote:
> This is a follow uo to Larry Varley's note about the nyloc nuts on the
> wishbone to frame pins.
> I've contacted the supplier of my bush/pin set in England with our
> concerns, and they responded promptly. They tell me they can get the
> original style castellated nuts, or a thinner locknut.
>
> I'm going to give the thinner locknuts a try, because I can't face taking
> the coil springs out again, to remove and drill the bolts for the split
> pins. As it is, I'm going to have to remove a few things to make access
> easier. I'm just glad I'm doing this before my final bolting up of the body
> panels.
>
> Mike Salter mentioned using thinner locknuts...did that fix the problem,
> Mike?
>
> Stephen, BJ8
> ______________________________**_________________
> Support Team.Net
> http://www.team.net/donate.**html<http://www.team.net/donate.html>
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/**listinfo/healeys<http://autox.team.net/mailman/listinfo/healeys>
>
> Unsubscribe/Manage: http://autox.team.net/mailman/**
> options/healeys/michaelsalter@**gmail.com<http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com>
>
>
--
Michael Salter
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|