Hi Jonas,
>From memory the 3/4th hub on the BJ8 box is different from the earlier ones
in that it has an extra plunger which must be aligned correctly with the
3rd motion shaft groove..
I don't have my parts book but you can see it here
<http://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=28882>as
item number 29.
Michael Salter
On Mon, Dec 31, 2012 at 12:15 PM, Jonas Payne <jagmog@hotmail.com> wrote:
> Just re-assembled by BJ8 transmission and have tried to bench test it -
> won't shift into 3rd or forth, so removed the cover, removed all the rods
> and forks and can't get the hub to move to either 3rd or 4th gear.
>
> I know that on other transmissions (Moss Boxes in particular) that if you
> don't have the "plunger" that sits inside the sliding collar on a specific
> point rotationally on the shaft, that this can occur, but didn't see any
> such instruction in the manual.
>
> Anybody have any idea what I've done wrong?
>
> Jonas Payne
> PBR Consulting
> 702-882-6711
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|