Tom,
How long did the engine not run before you observed the leak.
If an engine has not been run for a considerable time some corrosion may
develop on the sealing surface. This will cause some initial leaking
that usually disappears after some driving. The same with a new water
pump, which is likely to leak a bit until the mating surfaces have
bedded in.
Kees Oudesluijs
NL
Op 23-11-2012 16:42, Tom Felts schreef:
> OK---so my theory is probably wrong----------after the leak stopped---it
> started again---and this time I could see coolent coming from the opening on
> the bottom of the WP---------so--------a new WP looks to be in the works for
> me-------
>
> Thanks again for all the advice on this concern.
>
> tom
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|