Girling lists bores of 0.62 inch (the one I have); 0.70 inch and 0.75 inch
before getting to the 7/8 inch on the BJ8. I suppose I could give the .70
inch a try
Rick
"Madman in a death machine"
Follow My Nasty Boy Build:
http://tinyurl.com/yj52fwo
________________________________
From: Magnus
Karlsson <magnuskarlsson@bornet.net>
To: HealeyRick <healeyrick@yahoo.com>
Cc: Healey Lista <healeys@autox.team.net>
Sent: Wednesday, October 31, 2012
7:03 PM
Subject: Re: [Healeys] Disc Brake Upgrade
You can not use the 5/8"
as the pedal will bottom out. There are one or two sizes between the 5/8" and
7/8". Unfortunately I do not remember which one to use but as said before I
believe the next one up is ok. You do not have to go as high as the 7/8"
though, as it will, like someone said, result in a very hard pedal.
Magnus
Karlsson
www.concourshealeys.com
31 okt 2012 kl. 01:57 skrev HealeyRick
<healeyrick@yahoo.com>:
I have no servo and am running the 5/8" BJ7 m/c
(same as the BT7) The BJ8 w/servo is 7/8"
>What's your opinion, stay with
the 5/8 or go to the 7/8?
>
>Thanks
>
>
>Rick
>
>
>"
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|