Please disregard my earlier remark. That is only true for overhead
camshaft engines, not AH engines.
Kees Oudesluijs
NL
Op 25-10-2012 11:47, Oudesluys schreef:
> If the block or head have been skimmed the marks do not line up
> properly any more. Choosing the nearest match is probably best. Often
> a thicker head gasket can be fitted to help out.
> Kees Oudesluijs
> NL
>
> Op 25-10-2012 2:47, Jonathan Quandt schreef:
>> I am installing a new crank gear on a 100-4 and the cam gear mark
>> does not quite line up as it should according to the pictures in the
>> manual with #1 at TDC. How close is close enough? Should I bite and
>> order an adjustable cam gear? Cheers, JQ
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation $12.75
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>>
>> Healeys@autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
>>
>>
>
>
--
Kees Oudesluijs
Dorpsstraat 183
2995XG Heerjansdam
T: 078-677 1233
E: coudesluijs@chello.nl
Technische commissie Jensen Healey en GT
Het Jensen Genootschap Holland
www.jensenholland.nl
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|