These are cheap and cheerful units. I have not heard of failures yet,
but the loose fit seems to occur sometimes. Just apply a little sealant
and rotate the ring until it hits the cam properly and secure it. Let
the sealant cure fully. This will centre the ring and keep it fixed on
the cam without play. It is more or less the same system as from
Petronix and Luminition.
Kees Oudesluijs
Op 26-4-2012 10:44, Larry Varley schreef:
Hi Guys, has anyone had experience with the Accu Spark distributor
conversion for pointless operation on a BT7? I bought a kit out of
curiosity, which was quite cheep and found that the firing ring that
fits over the distributor cam, is quite a loose fit and can rotate a
little on the cam, so I can't see how it could maintain regular
timing. Has anyone successfully used this kit? The concept looked good
as there are basically no modifications or extra wiring, and the
sender unit fits well on the points plate.
Cheers
Larry
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
-----
Geen virus gevonden in dit bericht.
Gecontroleerd door AVG - www.avg.com
Versie: 2012.0.1913 / Virusdatabase: 2411/4959 - datum van uitgifte:
04/25/12
--
Kees Oudesluijs
Dorpsstraat 183
2995XG Heerjansdam
T: 078-677 1233
E: coudesluijs@chello.nl
Technische commissie Jensen Healey en GT
Het Jensen Genootschap Holland
www.jensenholland.nl
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/mharc@autox.team.net
|