[Healeys] Reassembling HS6 carbs

[ahy3000 at comcast.net (ahy3000 at comcast.net)]

I'm in the process of doing my first rebuild of my HS6 carbs. They were working 
okay but developed leaks at the flexible jet tubes. Starting reassembly with a 
rebuild kit but I've noticed that the jet assembly seems to hang up inside the 
jet bearing. Does one lubricate the jet assembly or does the throttle linkage 
pull it back down as necessary? 

TIA 



Burt Weiner 
'63 BJ7 
HBJ7L/23582 
ahy3000 at comcast.net