Many thanks to those responding to my post. I'll lubricate the jet assembly/jet
bearing. I don't have any issue with the piston (yet). Any words of wisdom on
centering new needles?
Burt Weiner
'63 BJ7
HBJ7L/23582
ahy3000@comcast.net
----- Original Message -----
From: ahy3000@comcast.net
To: healeys@autox.team.net
Sent: Saturday, January 21, 2012 3:38:07 PM
Subject: [Healeys] Reassembling HS6 carbs
I'm in the process of doing my first rebuild of my HS6 carbs. They were working
okay but developed leaks at the flexible jet tubes. Starting reassembly with a
rebuild kit but I've noticed that the jet assembly seems to hang up inside the
jet bearing. Does one lubricate the jet assembly or does the throttle linkage
pull it back down as necessary?
TIA
Burt Weiner
'63 BJ7
HBJ7L/23582
ahy3000@comcast.net
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/ahy3000@comcast.net
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|