Hi John,
B
Yes I will reamB the bushB to suit the shaft, I needed the shaft diameter in
order to purchase the correct reamer.
B
My thanks to Herb Miller for providing a measurement of 0.810 inches for the
shaft.
B
Thanks again,
Dave
BJ8
----- Original Message -----
From: "john spaur" <jmsdarch@sbcglobal.net>
To: drmasucci@comcast.net
Cc: healeys@autox.team.net
Sent: Saturday, January 28, 2012 7:37:13 PM
Subject: Re: [Healeys] C-series engine rocker shaft diameter
Dave,
The workshop manual for my '62 MKII tells the mechanic to ream the
internal diameter of the bush to suit the shaft.
John
At 11:45 PM 1/28/2012 +0000, drmasucci@comcast.net wrote:
>While I appreaciate all of the great advice which I didn't really ask for ,
no
>one actually answered my question.
>
>But thanks anyway.
>
>Dave
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|