Lin, Could be the check valves in the pump body. I had that same problem on
my '67 BJ8 years ago. The check valves have a thin plastic disc in them and
can split and not seal off when pumping. Hope this helps.
Larry
'67 BJ8
-----Original Message-----
From: Linwood H Rose <linwoodrose at mac.com>
To: healeylist <healeys at autox.team.net>
Sent: Fri, Dec 23, 2011 9:52 am
Subject: [Healeys] Dry Fuel Pump
Hi Folks,
erry Christmas and Happy Holidays.
I neglected my Bugeye (too long since I started it - yes, I know better!), and
ow when the ignition is switched on the SU pump clicks like crazy, but it is
ot drawing fuel. Tank is almost full, so I am not out of gas!
I am wondering if I need to somehow prime the pump to get it going. If so,
what
s the recommended procedure. Alternatively, do I have another problem? New
pump
equired? It is a solid state SU pump, not points. I replaced the mechanical
ump original to the Bugeye long ago.
Thanks for your thoughts and recommendations would be appreciated.
in
in Rose
959 AN5 Bugeye - pure driving enjoyment, go-kart with a body.
960 BT7 "The Bloody Beast" - owned since 1971, my first car and still have
it!
964 Jag MKII - current project
uggested annual donation $12.75
rchive: http://www.team.net/archive
orums: http://www.team.net/forums
Healeys at autox.team.net
ttp://autox.team.net/mailman/listinfo/healeys
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/bighealey3k at aim.com
|