Thank you very much for your warm welcome, how suggested by Rich in
the next days I'll check if the engine mounts are in the correct
position (left and right) because they are new . I'll send you a
picture of problem as soon as possible. To install the rear carb, the
engine should be higher than it is now. Then I should see if there are
problems with the front shroud and the hood.
Daniele
2011/11/7 David Nock <healeydoc@sbcglobal.net>:
> The pedal boxes on the 6 cylinder cars are all the same except for the
small
> cut out to make room for the air filter on the BJ8 when they changed to the
> HD8 carbs
>
>
>
>
> David Nock
>
> British Car Specialists
>
> Stockton Ca 95205
>
> 209-948-8767
>
> www.britishcarspecialists.com
>
> .
>
> .
>
> On Nov 7, 2011, at 1:04 AM, Daniele Ceccarelli wrote:
>
> Hello I'm a new member of mailing list. My name is Daniele and I'm
> restoring an AH 3000 BT7 MKI of 1959.
> Does anyone know if the pedal box was modified to install the HD6 carb
> with thermo choke? I ask that because I can't install my carbs. When
> I disassemble the car I noticed that the pedal box in the point near
> the rear carb was just a little bit bent by some hammer blow (see the
> picture attach). During the body work we repair the pedal box but now
> I can't install the carbs. You think I should bent the pedal box
> again? Does anyone send me pictures of pedal box area of car with
> thermo choke system?
> Sorry for my terrible English.
> [demime 1.01d removed an attachment of type image/jpeg which had a name of
> 00047.jpg]
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healeydoc@sbcglobal.net
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|