Hi Daniele,
Welcome to the 'Healey List.' This is a great place to get info, share tricks
and stories and, yes, even start an
argument or two.
He's too much the gentleman--and too modest--to announce it, but Rich is an
Austin-Healey restorer, a member of the
Concours Committee and an expert on all things Austin-Healey. Along with Curt
Arndt, David Nock and several others, we
have some real authorities on the List and any answer they give can be 'taken
to the bank.' The rest of us, well, we
get lucky sometimes.
Oh, the List doesn't allow attachments, for security reasons. If you want to
send photos you'll need to send them
directly to a member's email or, better yet, post them on a website (like
Flickr or Picasa).
Cheers,
Bob
On 11/7/2011 4:24 AM, Rich C wrote:
> Hello Daniele,
>
> The pedal box area on your BT7 should not be different than other models
> until they got to the BJ8 where they formed a bit more clearance for the air
> filter of the bigger HD8 carbs.
> If you have the stock twin carb HD6 setup with thermal choke arrangement,
> there should be good clearance there when fitting things. If there is not, I
> would suspect the engine mounts are either sagged and collapsed through age
> or the engine mount assemblies may be reversed....left to right and right to
> left. These are canted onto a slight angle and will certainly make a
> difference how the engine sits in the engine bay.
>
> Rich
>
>
>
> Hello I'm a new member of mailing list. My name is Daniele and I'm
> restoring an AH 3000 BT7 MKI of 1959.
> Does anyone know if the pedal box was modified to install the HD6 carb
> with thermo choke? I ask that because I can't install my carbs. When
> I disassemble the car I noticed that the pedal box in the point near
> the rear carb was just a little bit bent by some hammer blow (see the
> picture attach). During the body work we repair the pedal box but now
> I can't install the carbs. You think I should bent the pedal box
> again? Does anyone send me pictures of pedal box area of car with
> thermo choke system?
> Sorry for my terrible English.
>
> [demime 1.01d removed an attachment of type image/jpeg which had a name of
> 00047.jpg]
> _______________________________________________
>
--
*******************************************************************
Bob Spidell San Jose, CA bspidell@comcast.net
*******************************************************************
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|