One cable from the battery should go to the solenoid, the other should be
bolted to the chassis. Find the one bolted to the chassis and follow it to the
battery. Whichever terminal on the battery is connected to that cable indicates
chassis 'ground' (more correctly called 'common').
If the battery terminals aren't labeled, the positive terminal is usually
larger in diameter than the negative.
Bob
--------------------------------
Bob Spidell - San Jose, CA
----- Original Message -----
From: "Ron Ray" <ronald-ray@sbcglobal.net>
To: healeys@autox.team.net
Sent: Thursday, July 14, 2011 9:16:46 AM
Subject: [Healeys] Grounding
Folks,
Is there any way to tell if a car is positive or negative ground?
The previous owner used a red positive battery cable for both the positive
and ground cables.
Thanks,
Ron
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/bspidell@comcast.net
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|