Bob
You need to remove the speedometer face. To do that you need to remove
the needle. To remove the needle, put your little finger into one of the
holes at the back, then hold the drag cup and twist the needle slightly,
it will come off. If it doesn't, it's an other story we can discuss if
that happens. Then you have to recalibrate it when you put it together
again.
Be careful, it's easy to break things. And don't lube too much, oil and
grease attract dirt.
Per in Sweden
Bob Johnson skrev 2011-06-04 21:29:
> After watching my odometer the other day, I decided it needed cleaning
> and lube. Went to John Sims site and found article on speedos that I
> tried to follow. Can't get my Smiths 6125/22 on my BJ8 out of the
> case. The instuctions say "If the works do not move freely check the
> reset shaft and be sure that it is not catching on the case." Well, it
> is definitely catching on the case. I've removed the knurled reset
> knob, but I cannot push it in far enough to get it inside the case.
> Anyone know what I'm missing?
>
> Bob Johnson
> BJ8
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/healeyguy
> at bredband.net
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1382 / Virus Database: 1511/3679 - Release Date: 06/03/11
|