Speaking of holes, I am getting the final welding repair done to my BN2 frame
and have noticed numerous holes in the square tubing frame members. How do I
know what holes are supposed to be there, if any and which are not? I am
talking about holes that look like they are drilled flush with the face of the
metal. Obviously, holes with threads and/or bosses that look to be original
are easier to determine. I don't want to leave any place for the tin worms to
enter if possible. Or, am I worrying for nothing?
Mike MacLean
56 BN2
60 AN5
>________________________________
>From: I Erbs <eyera3@gmail.com>
>To: Bob
Spidell <bspidell@comcast.net>
>Cc: healeys <healeys@autox.team.net>
>Sent:
Friday, June 17, 2011 6:05 PM
>Subject: Re: [Healeys] BN1/2 Boot Floor Holes
>
>My BT7 had about 20 holes drilled into the boot floor by the dpo. I figured
>he could not locate z boot lid seal so he drained the water out of it.....
>
>Ira Erbs
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|